全焊板式熱交換器在熱電聯產機組中的應用
金正風
（江蘇巴威工程技術股份有限公司，江蘇 揚中 212200）
摘 要：熱交換器設備是熱電聯產機組中最重要的輔機設備體系，介紹了全焊板式熱交換器的結構特點、傳熱原理及其在熱電聯產機組中的應用，并將其與傳統管殼式熱交換器進行了對比分析。分析結果表明，全焊板式熱交換器兼?zhèn)湫滦涂刹鸢迨綗峤粨Q器和傳統管殼式熱交換器兩者的優點，在高溫高壓介質傳熱工況下?lián)碛凶吭降膫鳠嵝阅?，可在多個工況中充分替代管殼式熱交換器。
關鍵詞：全焊板式熱交換器；熱電聯產機組；管殼式熱交換器
中圖分類號：TK172；TM611 文獻標識碼：B 文章編號：1007-3175(2016)08-0036-03
Application of All-Welded Plate Type Heat Exchanger in Cogeneration Units
JIN Zheng-feng
（Jiangsu BAVI Engineering Technology Co., Ltd, Yangzhong 212200, China）
Abstract: The heat exchanger is the most important auxiliary engine equipment system in cogeneration units. Introduction was made to the structural features of all-welded plate heat exchangers, the heat diffusion principle and its application in cogeneration units. This paper compared and analyzed it with traditional shell-and-tube heat exchanger. The analysis results show that the all-welded plate heat exchanger has advantages of both new type removable heat exchanger and traditional shell-and-tube heat exchanger, possesses distinguished heat transfer property under the heat diffusion working conditions of high temperature and high pressure medium, and can replace the shell-and-tube heat exchanger sufficiently under multiple working conditions.
Key words: all-welded plate heat exchanger; cogeneration units; shell-and-tube heat exchanger
參考文獻
[1] GB/T 151—2014 熱交換器[S].
[2] 候霄艷，常春梅，張向南，等. 圓形板片板殼式熱交換器結構及特性分析[J]. 石油化工設備，2015，44(S1)：16-19.
[3] GB 150—2011 壓力容器[S].
[4] 王寧，張建東，范文斌，等. 煤化工行業一種氣-氣熱交換器改進設計[J]. 石油化工設備，2015，44(S1)：54-56.
