500 kV及以上輸電線路耐張引流板快速檢修裝置
鄭武略，翁珠奮，鄭曉，張富春
（南方電網超高壓輸電公司,廣東 廣州 510405）
摘 要：介紹了一種超高壓輸電線路耐張引流板快速檢修專用工具，通過分析機械強度及電氣參數選型確定結構，研制引流板快速檢修專用工器具。對快速檢修裝置的性能及經濟效益進行了分析研究，經各項強度測試實驗和與人工消缺時間對比，該裝置可有效降低跳線滑脫掉落的安全風險，解決現場安裝就位困難、作業時間長、極大耗費體力等問題。
關鍵詞：輸電線路；檢修裝置；引流板；跳線
中圖分類號：TM726 文獻標識碼：B 文章編號：1007-3175(2016)07-0041-03
Quick Overhaul Device for Drainage Board Withstand Tension on
500 kV and Above Transmission Lines
ZHENG Wu-lüe, WENG Zhu-fen, ZHENG Xiao, ZHANG Fu-chun
（Southern Power Grid EHV Transmission Company, Guangzhou 510405, China）
Abstract: Introduction was made to a kind of special tools for quick inspecting the drainage board withstand tension of extra-high voltage transmission lines. In order to determine the structure, this paper analyzed the mechanical strength and electrical parameters selection and developed the special tools for quick overhaul. The performance of quick overhaul device and economic benefit were carried out analysis and research. After the comparison of each strength test and artificial defect elimination time, this device can effectively reduce the security risk of jumper slip fall, solving the difficult installation in place, long operation time, waste of large strength and so on.
Key words: transmission line;overhaul device;drainage board;jumper
參考文獻
[1] 張華杰，朱丹，曾東，等.500 kV線路桿塔引流板帶電消缺安全校核[J]. 電氣技術，2013，14(2)：86-90.
[2] 王震，凌惠民. 帶負荷檢修500 kV線路耐張線夾引流板[J]. 高電壓技術，2005，31(10)：82-83.
[3] 牛永志，屈以軍. 帶負荷檢修處理輸電線路耐張?zhí)€引流板過熱缺陷[J]. 安徽電力，2014，31(2)：12-14.
[4] DL/T 966—2005 送電線路帶電作業技術導則[S]．
[5] GB/T 18037—2008 帶電作業工具基本要求與設計導則[S]．
[6] 胡濤，胡毅，李景祿，等. 輸電線路帶電作業的安全防護[J]. 高電壓技術，2006，32(5)：22-25.
