一種基于配網自動化系統的整組試驗方法的研究 

馮迎春 
(揚州供電公司，江蘇 揚州 225001) 
 

摘 要： 針對目前配網自動化系統的饋線自動化功能，提出了一種配網自動化系統故障隔離和網絡重構的整組試驗方法。該方法能夠在配網自動化系統運行的配電線路上通過主、子站下傳帶時標的模擬故障信息給控制終端，控制終端在規定時間點上傳解釋后的虛遙信，從而實現配網故障研判、隔離和重組。該方法在配電線路停電或運行時均適用，停電試驗或在線仿真試驗簡單、實用、高效，可作為配網自動化系統饋線自動化功能整組試驗的通用試驗方法。
關鍵詞： 配網自動化；故障隔離；網絡重構；饋線自動化試驗
中圖分類號：TM762.1+4 文獻標識碼：A 文章編號：1007-3175(2014)07-0045-04

Research on Network-Reconfiguration Test Method Based on Distribution Network Automation System 

FENG Ying-chun 
（Yangzhou Power Supply Company, Yangzhou 225001, China） 
 

Abstract: Aiming at the feeder automation function of the distribution network automation system, at present, this paper proposed a faultisolation and network-reconfiguration test method of distribution network automation system for the total group. This method could download the time-marked simulation fault information of distribution lines with the distribution network automation system and then sent them to the control terminals through master and slave station. The control terminal uploaded the explained virtual remote signals at the given time points, so as to realize fault analysis, fault isolation and restructuring of distribution network. This method applied in both outage and running distribution lines is proved simple, practical and efficient in power cut test or online simulation test, so that it can be used as a general test method of the total feeder automation function test for the distribution network automation system.
         Key words: distribution network automation system; fault isolation; network reconfiguration; feeder automation test

參考文獻
[1] 劉東，閆紅漫，丁振華，等. 饋線自動化的出廠試驗與現場試驗技術方案[J]. 電力系統自動化，2005，29(3)：81-85.
[2] 劉東，閆紅漫.配電自動化系統試驗技術及其進展[J].電工技術，2004(7)：34-37.
[3] 劉健，張小慶，趙樹仁，陳宜凱，劉彬.配電自動化故障處理性能主站注入測試法[J].電力系統自動化，2012，36(18)：67-71.
[4] 劉健，趙樹仁，張小慶.中國配電自動化的進展及若干建議[J].電力系統自動化，2012，36(19)：6-10.
[5] 王永利，徐宏炳，董逸生，等. 配電自動化的數據流管理系統設計[J]. 電力系統自動化，2004，28(13)：85-89.
[6] 劉東，丁振華，滕樂天.配電自動化實用化關鍵技術及其進展[J].電力系統自動化，2004，28(7)：16-19.