Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

超臨界流體發泡擠出機溫度控制系統研究

來源:電工電氣發布時間:2016-04-05 16:05 瀏覽次數:763

超臨界流體發泡擠出機溫度控制系統研究 

徐天藝 
合肥會通中科材料有限公司,安徽 合肥 230088 
 

摘 要: 介紹了超臨界流體發泡擠出機的溫度控制系統,分析了影響擠出設備溫控系統精度的因素,并提出了改進措施,即利用雙通道PID 結合可控硅調整加熱冷卻系統的輸出功率,降低了系統的熱慣性與遲滯性。實驗結果表明,控溫精度可達到±1 ℃,極大地提高了擠出發泡制品的質量和成品率。 關鍵詞: 超臨界流體;雙通道控制;可控硅;溫度控制
中圖分類號:TM571 文獻標識碼:A 文章編號:1007-3175(2013)11-0057-04


Study on Temperature Controlled System of Supercritical Fluid Foaming Extruder 

XU Tian-yi 
Hefei Orinko-zhongke Plastic Material Co., Ltd, Hefei 230088, China 
 

Abstract: Introduction was made to a supercritical fluid foaming extruder temperature control system. Analysis was made to factors impacting on the accuracy of equipment temperature control system, the improved measures were raised. Combined with thyristor adjusting output power of heating and cooling system, the double-channel PID was used to reduce thermal inertia and hysteresis. Experimental result shows that the temperature control accuracy can reach ±1℃, which greatly lifted quality and finished product percentage of extrusion foaming products.
          Key words: supercritical fluid; dual channel controller; silicon controlled rectifier; temperature control


參考文獻
[1] 趙文明.對我國聚丙烯技術及市場發展的認識和思考[J].化學工業,2009,27(12):10-16.
[2] 曹現福,陳鳴才,陳德宏,等. 超臨界二氧化碳在高分子合成及加工領域的應用[J]. 高分子通報,2006(7):65-70.
[3] 何繼敏.新型聚合物發泡材料及技術[M].北京:化學工業出版社,2008.
[4] 宋英華,王云寬,龔利,等.注塑機料筒溫度的自校正PID控制[J].中南大學學報,2007,38(1):905-909.
[5] 彭慶紅.擠出機溫度控制系統中PID控制器的應用[J].現代機械,2010(1):73-75.
[6] 張還.基于PLC和智能溫控表的塑料擠出機溫度控制系統設計[J].工程塑料應用,2010,39(1):76-79.
[7] 朱建華.塑料擠出機雙通道智能溫度控制系統的設計[J].輕工機械,2006,24(4):124-126.
[8] 俞洪斌,金波,舒柏和.智能PID溫控系統在塑料擠出機中的應用[J].輕工機械,2007,25(5):56-60.