Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

感應耦合式非接觸電能傳輸系統的設計

來源:電工電氣發布時間:2016-03-15 14:15 瀏覽次數:743

感應耦合式非接觸電能傳輸系統的設計 

沈慧娟,曾憲智

浙江嘉興學院,浙江 嘉興 314001 
 

摘 要:基于電磁感應原理,運用現代電力電子能量變換技術和控制方法,實現供電線路和用電設備之間的非接觸電能傳輸。通過對初級變換器拓撲選擇及主要元器件參數的分析,提出非接觸電能傳輸系統的設計,并對系統的效率和補償?shù)汝P(guān)鍵問題進行了仿真及實驗研究,提高了系統的傳輸效率。
關鍵詞:可分離變壓器;非接觸電能傳輸;原副邊補償 
中圖分類號:TM724 文獻標識碼:A 文章編號:1007-3175(2013)04-0024-04


Design of Inductive Coupling Contactless Power Transmission System 

SHEN Hui-juan, ZENG Xian-zhi 
Jiaxing University, Jiaxing 314001, China 
 

Abstract: On the basis of the principle of electromagnetic induction, the energy converting technology of modern power electronics and controlling methods were adopted to realize contactless power transmission between power lines and electrical equipments. A design of contactless power transmission system was set up by selecting the topology of primary converter and analyzing parameters of main components. Simulation and experimental study of key points on the efficiency and compensation of the system were completed, which improved transmission efficiency of the system.
Key words: detachable transformer; contactless power transmission; primary and secondary compensation


參考文獻
[1] 盛松濤.感應耦合式電能無線傳輸關鍵技術研究[D].廣州:華南理工大學,2007.
[2] 黃杰.非接觸電能傳輸系統的研究[D].廣州:廣東工業大學,2009.
[3] Valtchev S,Borges B, Brandisky K,et al.Resonant Contactless Energy Transfer with Improved Efficiency[J].IEEE Transactions on Power Electronics,2009,24(3):685-699.
[4] 王興,謝海明.高頻逆變電路在非接觸感應電能傳輸系統中的應用[J].電工電氣,2011(9):31-34.
[5] 劉建.基于松耦合變壓器的全橋諧振變換器的研究[D].南京:南京航空航天大學,2008.
[6] 潘冬婷.無接觸電能傳輸系統的設計與實現[D].大連:大連理工大學,2010.
[7] 趙志斌,孫躍,周詩杰,田勇.非接觸電能傳輸系統參數優化的改進遺傳解法[J].西安交通大學學報:自然版,2012,46(2):106-112.
[8] 石鑫棟,戴宇,張鈺,等.非接觸式弱電實驗供電平臺的設計[J].現代電子技術,2011,34(24):3-5.