220 kV備用電源自投功能邏輯分析 

盧迪勇 
廣東電網公司東莞供電局，廣東 東莞 523120 
 

摘 要： 介紹了220 kV 備自投功能的邏輯，結合現場使用，以主供線路、備投線路、備投母聯分析了開關狀態設置，以線路備投、母聯備投闡述充放電條件的原因。分析了備自投啟動邏輯，結合邏輯順序模擬備自投啟動，分步列出動作結果，為220 kV 備自投裝置驗收及運行提供了依據。
關鍵詞： 備用電源；備自投；母線；充電；放電
中圖分類號：TM762.1 文獻標識碼：B 文章編號：1007-3175(2013)03-0031-03

Automatic Switch-On Function Logic Analysis of 220 kV Standby Power Supply 

LU Di-yong 
Dongguan Power Supply Bureau of Guangdong Power Grid Company, Dongguan 523120, China 
 

Abstract: Introduction was made to the logic of automatic switch-on function of 220 kV standby power supply. Combined with onsite usage condition, this paper analyzed switch status setting for main supply lines, standby supply automatic switch-on lines, standby supply automatic switch-on busbar connection. Causes of charging and discharging conditions were described according to lines standby automatic switch-on and busbar connection standby switch-on. This paper analyzed standby automatic switch-on starting logic and combined logic sequence to simulate standby automatic switch-on starting and to list action result step by step, which provides basis for acceptance of 220 kV standby power supply automatic switch-on device.
Key words: standby power supply; standby power supply automatic switch-on; bus bar; charge; discharge

參考文獻
[1] 張自民，章學民，湯代勝. 進線保護、備自投、自復位功能一體化裝置[J]. 電氣自動化，2012，34(2)：64-65.
[2] 董立天，魏志軍，徐英強.微機備用電源自投裝置現場運行分析[J].繼電器，2007，35(13)：70-73.
[3] 李洪衛，張繁，王穎.穩控裝置與備自投裝置相沖突的解決方案[J].電工技術，2010(10)：23-24.