一種單穩態繼電器高速檢測系統的研制
倪正清
(南京南瑞繼保電氣有限公司，江蘇 南京 211102)
摘 要：針對傳統單穩態繼電器自動檢測系統存在檢出量偏低與故障排除周期長等局限性，開發了一種單穩態繼電器高速檢測系統。介紹了系統各組成單元及相應功能，并闡述了相較原有系統的改進點，經測試效率與故障停機時間比較，該系統實現了取料、測試與分級、噴碼、收料等全過程無縫銜接，及嵌入的效能監測模塊實時監視定點清除，大幅提升檢測效率與可維護性，保障了大生產流程運作高效性。
關鍵詞： 單穩態繼電器；測試分級；無縫銜接；效能監測
中圖分類號：TM58 文獻標識碼：A 文章編號：1007-3175(2023)09-0052-05
Design of a Monostable Relay High-Speed Detection System
NI Zheng-qing
（NR Electric Co., Ltd, Nanjing 211102, China）
Abstract: The traditional monostable relay automatic detection system has disadvantages of low detectable amount and long troubleshooting period, so the paper develops a monostable relay high-speed detection system. In the paper, the components and corresponding functions of this system are first introduced, and then improvements to the original system are described. Through comparing their efficiency of measurement and fault downtime, this new system can realize the whole process seamless connection of fetching, testing and grading, spray printing and receiving, and the embedded performance monitoring module can monitor the fixed point removal in real time. Therefore, it greatly improves the efficiency of measurement and maintainability and ensures the high efficiency of mass production operation.
Key words: monostable relay; test grading; seamless connection; performance monitoring
參考文獻
[1] 胡向東. 傳感器與檢測技術[M] .3 版. 北京：機械工業出版社，2018.
[2] 姜洪源，秦大同，閆輝. 機械傳動設計[M].2 版. 北京：化學工業出版社，2020.
[3] 何衍慶，黃海燕，黎冰. 可編程序控制器原理及應用技巧[M].3 版. 北京：化學工業出版社，2010.
[4] 朱祖芳. 鋁合金陽極氧化與表面處理技術[M] .3 版. 北京：化學工業出版社，2021.
[5] 項華珍. 數字電路與邏輯設計基礎[M] . 北京：機械工業出版社，2016.
[6] 馮清秀，鄧星鐘. 機電傳動控制[M] .5 版. 武漢：華中科技大學出版社，2011.
