Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

特高強鋼芯鋁合金絞線在大跨越輸電線路中應用

來源:電工電氣發布時間:2022-10-25 11:25 瀏覽次數:307

特高強鋼芯鋁合金絞線在大跨越輸電線路中應用

姚成,張瑞永,趙新宇
(中國能源建設集團江蘇省電力設計院有限公司,江蘇 南京 211100)
 
    摘 要:導線選型是大跨越輸電線路的關鍵技術之一,對工程造價和安全運行意義重大。針對特高強鋼芯鋁合金絞線進行了載流能力分析,對導電材質不一樣的 JLHA1 與 NRLH2 型兩種特高強鋼芯鋁合金絞線進行了對比分析,從輸送能力、鋁部應力、經濟性等方面系統地分析了特高強鋼芯鋁合金絞線導電層、承力層材質、鋁鋼比、鋼芯強度對大跨越導線選型設計的影響,并給出大跨越輸電線路導線設計建議。
    關鍵詞: 大跨越輸電線路;特高強鋼芯鋁合金絞線;鋁部應力;鋁鋼比;鋼芯強度
    中圖分類號:TM726.3 ;TM751     文獻標識碼:B     文章編號:1007-3175(2022)10-0030-06
 
Application of Ultra High Strength Steel Cored Aluminum
Alloy Strand in Large-Span Transmission Line
 
YAO Cheng, ZHANG Rui-yong, ZHAO Xin-yu
(China Energy Engineering Group Jiangsu Electric Power Design Institute Co., Ltd, Nanjing 211100, China)
 
    Abstract: Conductor selection is one of the vital technologies of large-span transmission lines, which has great significance to the project cost and the safe operation.This paper analyzed the current carrying capacity of ultra high strength steel cored aluminum alloy strands, and two kinds of ultra high strength steel cored aluminum alloy strands with different conductive materials, JLHA1 and NRLH2, are compared and analyzed. Moreover, this research systematically analyzed the influence of the conductive layer, materials of the stressed layer, different aluminum steel ratios, and the steel core strength of the ultra high strength steel cored aluminum alloy strand on the design of the selection of large-span conductors from aspects of transmission capacity, stress of aluminum part, and strength of steel cored. Furthermore, this study provides suggestions for the design of large-span conductors.
    Key words: large-span transmission line; ultra high strength steel cored aluminum alloy strand; stress of aluminum part; aluminum steel ratio; strength of steel cored
 
參考文獻
[1] 華東電網有限公司. 華東電網 500 kV 大跨越輸電工程匯編[G]. 上海:《華東電力》編輯部,2007.
[2] 國家電網公司. 特高強鋼芯鋁合金絞線:Q/GDW 11275—2014[S]. 北京:中國電力出版社,2015:1.
[3] 黃欲成,陳池,汪峰,趙全江,柏曉路,文曉旭. 大跨越架空輸電導線鋼芯鋁股應力分布特性研究[J] .三峽大學學報(自然科學版),2016,38(4):76-81.
[4] 鄭黎陽,孫祖志. 鋁絞線和鋼芯鋁絞線的應力分析[J]. 武漢水利電力大學學報,1997,30(3):65-68.
[5] 張瑞永,趙新宇,李明,許志勇,吳鎖平,賈振宏. 輸電線路新型節能導線的推廣應用[J] . 電力建設,2012,33(6):89-92.
[6] 張慶. 輸電線路新型節能導線選型與技術經濟比較分析[J]. 中國外資,2013(20):385.
[7] 陽隆富. 工程設計方案的經濟比較——年費用的計算[J]. 廣西電力工程,1996(3):28-34.
[8] 能源行業電網設計標準化技術委員會.110 kV~750 kV 架空輸電線路大跨越設計技術規程:DL/T5485—2013[S]. 北京:中國計劃出版社,2014:12.
[9] MORGAN V T . Electrical characteristics of steel-cored aluminum conductors[J].Proceedings of the Institution Electrical Engineers,1965,112(2):325-334.
[10] ARNOLD A H M . The alternating-current resistance of tubular conductors[J].Journal of the Institution of Electrical Engineers,1936,78(473):580-596.
[11] 張瑞永,趙新宇,陶禮學. 架空導線的交流電阻計算方法對比[J]. 電線電纜,2014(4):1-3.