Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

一起特高壓隔離開關操作回路異常分析

來源:電工電氣發布時間:2022-01-20 10:20 瀏覽次數:585

一起特高壓隔離開關操作回路異常分析

蔣小偉,馬國鵬,費韜,宋立華,姜濤
(國網浙江省電力有限公司檢修分公司,浙江 杭州 310000)
 
    摘 要:隔離開關 (閘刀) 的操作回路可靠完善對保證閘刀穩定運行具有重要作用。以 1 000 kV 特高壓某站閘刀拒合閘為例,對故障現象進行初步分析,結合圖紙與經驗對故障閘刀操作回路進行詳細檢查處理;針對檢查中發現的控制回路自保持功能存在導致閘刀三相異常分、合閘的問題,結合圖紙分析了該隱患發生的原因,同時處理中發現拉開閘刀控制電源空氣開關 (空開) 和電機電源空開無法消除自保持;根據閘刀控制回路接線和空開模式的特點,提出了相應整改方案,提高了電網安全穩定運行。
    關鍵詞:特高壓;隔離開關;操作回路;自保持;空氣開關
    中圖分類號:TM564.1     文獻標識碼:B     文章編號:1007-3175(2022)01-0045-04
 
Abnormal Analysis of UHV Disconnector Operation Circuit
 
JIANG Xiao-wei, MA Guo-peng, FEI Tao, SONG Li-hua, JIANG Tao
(Maintenance Branch of State Grid Zhejiang Electric Power Co., Ltd, Hangzhou 310000, China)
 
    Abstract: The reliable and perfect operating circuit of the disconnector (knife switch) plays a vital role in ensuring the stable operation of the knife switch.This paper gave an example that the disconnector refused to close in a 1 000 kV UHV substation. It analyzed the symptom of the disconnector, the operation of the break disconnector has been checked as well.It also analyzed the phenomenon that the existence of the control loop self-holding function generated the abnormal opening and closing problem of the three-phase disconnector. During the dealing process, this research discovered that opening the air switch of the knife switch control power and the motor power can not eliminate the self-holding.According to the characteristics of the switch control circuit wiring and air switch mode, this article provides a corresponding rectification scheme to improve the safe and stable operation of the power grid.
    Key words: UHV; disconnector; operating circuit; self-holding; air switch
 
參考文獻
[1] 劉振亞. 特高壓電網[M] . 北京:中國經濟出版社,2005.
[2] 吳美潮. 中國電氣進入特高壓時期[J] . 電氣世界,2005(7) :60.
[3] 齊炳利,孟忠,王宇馳,等.800 kV 高壓交流隔離開關研究開發[J]. 高壓電器,2012,48(4) :46-53.
[4] 魏磊,郭潔,賈宏剛,等.750 kV GIS 中隔離開關取消合分閘電阻可行性研究[J] . 高壓電器,2016,52(5) :136-140.
[5] 李志兵,陳維江,王浩,等. 特高壓交流試驗示范工程 GIS 隔離開關帶電操作試驗[J]. 高電壓技術,2012,38(6) :1436-1444.
[6] 雷兵,夏擁.500 kV HGIS 隔離開關控制回路設計變更淺析[J]. 高壓電器,2009,45(1) :107-108.[7] 麥少銳. 隔離開關控制回路常見隱患問題分析及處理方法[J]. 機電信息,2018(12) :24-26.
[8] 孫亞輝. 電動操作隔離開關控制回路設計分析與應用[J]. 電氣技術,2010(9) :66-69.
[9] 盛明學,王志清. 戶外高壓隔離開關常見故障的原因分析與處理[J]. 高壓電器,2010,46(10) :93-96.
[10] 夏業波. 隔離開關控制回路常見問題及處理措施[J]. 設備管理與維修,2019(22) :96-97.
[11] GUAN Yonggang, CAI Yuanji, CHEN Weijiang,et al.Repeated strike process during disconnector operation in ultra-high voltage gas-insulated switchgear[J]. 等離子體科學與技術(英文版),2016(3) :247-253.
[12] 梁方建,吳建輝,胡路東,等. 一起 220 kV 隔離開關電機開關誤分事故分析[J] . 高壓電器,2018,54(1) :249-251.
[13] 張碩穎. 一起 220 kV 隔離開關控制失效的診斷與處理[J]. 高壓電器,2012,48(4) :92-96.
[14] 李鋒,齊桂林. 隔離開關控制回路的自保持功能研究[J]. 電氣時代,2016(10) :79-80.
[15] 許艷陽. 隔離開關操作要訣及事故異常處理探討[J]. 中國電力教育,2011(24) :155-156.
[16] 梁小流,陳炳森,陳韶光.220 kV 變電站隔離開關控制回路隱患分析及改進方案[J] . 紅水河,2013,32(3) :66-68.
[17] 管宇. 變電站隔離開關異常分析及處理方法研究[J]. 機電信息,2019(5) :44-45.
[18] LIN Xin, WANG Na, XU Jianyuan.Arcing model of a disconnector and its effect on VFTO[J]. 等離子體科學與技術( 英文版),2013(7) :644-647.
[19] 于軍,吳金祥,羅茂嘉,等. ABB 保護跳閘出口自保持繼電器監視功能的實現[J] . 浙江電力,2012(4) :24-27.
[20] 袁皓, 劉培文, 郝欣偉, 等. 電纜分布電容對固態繼電器自保持電路的影響[J] . 電子制作,2019(1) :69-70.